Polylaminated doors
Composition
Board:

MDF board, 19 mm or 22 mm thick, mainly with melamine backing.

Coatings:

Front face: The board is covered with different laminates of various designs and textures, depending on the model, and may be melanine, decorative laminate HPL 1.2 mm or laminated PET 0.3 mm thick, among others, always with a protective film.


Back face: same colour or melanine depending on the model.

Edge: PUR glue (reactive polyurethane, cold pressed) is used to adhere the edge that can be Acrylic, PVC or ABS, in different finishes and designs.

Characteristics físico-mecánicas
CARACTERÍSTICA VALOR NORMA
Density (Kg / m3) for guidance 820 EN 323
Tensile strength (N / mm2) 0.7 EN 319
Swelling (% 2h water) 10 EN 317
Flexural strength (N / mm2) 18 EN 310
Surface traction (N / mm2) 1.2 EN 311
Modulus of elasticity (N / mm2) 2100 EN 310
Residual humidity (%) 11-4 EN 322
Content formaldehyde (mg / 100g) E1 EN 120
Abrasion resistance IP < 50 EN 14323
Scratch resistance > 1.5N EN 14323
Resistance to cracking > grado 4 EN 14323
Resistance to stain > grado 4 EN 14323

 

Limpieza y uso

No someta las piezas a condiciones externas de humedad y/o altas temperaturas. Límpielas con un paño seco o humedecido en agua con detergente líquido neutro, enjuaguélas y séquelas muy bien; evite el uso de productos abrasivos o que contengan alcohol o disolventes (acetona, tricloroetileno, nitroderivados o amoníaco), ni estropajos de acero inoxidable.

Warranty

Our doors have passed rigorous tests, in the most adverse conditions, carried out by the AIDIMME Technological Institute, which guarantee the quality of our products. So we guarantee all our products for a period of 6 YEARS from the date of purchase, against any manufacturing defect or hidden defects committing to its replacement without charge.


The following are expressly excluded from this guarantee and from any liability for any direct or indirect damage to persons or things, faults or defects caused by improper handling or storage conditions.