Board:
MDF board 19 mm or 22 mm thick, mainly with melamine back.
Coatings:
The face of the board is covered with two coats of primer (polyester primer), two coats of polyurethane paint, plus two coats of acrylic or polyacrylic lacquer, depending on the finish. The back side is covered with a coat of polyurethane paint.
FEATURE | VALUE | NORMA |
---|---|---|
Density (Kg / m3) for guidance | 820 | EN 323 |
Tensile strength (N / mm2) | 0.7 | EN 319 |
Swelling (% 2h water) | 10 | EN 317 |
Bending resistance (N / mm2) | 18 | EN 310 |
Surface traction (N / mm2) | 1.2 | EN 311 |
Modulus of elasticity (N / mm2) | 2100 | EN 310 |
Residual Moisture (%) | 11-4 | EN 322 |
formaldehyde content (mg / 100g) | E1 | EN 120 |
Abrasion resistance | IP>50 | EN 14323 |
Scratch resistance | > 1.5N | EN 14323 |
Resistance to fissures | > grado 4 | EN 14323 |
Stain resistance | > grado 4 | EN 14323 |
Do not subject the parts to external conditions of humidity and / or high temperatures. Clean them with a dry cloth or moistened with water with neutral liquid detergent, rinse them and dry them very well; avoid the use of abrasive products or products containing alcohol or solvents (acetone, trichlorethylene, nitroderivatives or ammonia), or stainless steel scouring pads.
Our doors have undergone rigorous tests, under the most adverse conditions, carried out by the AIDIMME Technological Institute, which guarantee the quality of our products. So we guarantee all our products for a period of six years from the date of purchase, against any manufacturing defect or hidden defects committing to its replacement without charge.
The following are expressly excluded from this guarantee and from any liability for any direct or indirect damage to persons or things, faults or defects caused by improper handling or storage conditions.